Get Your Quote

Select the layout for placing the stone and specify the exact measurements, beside the edges.
If none of the layout is as per your requirements then select the last box and specify the measurements.

Nothing to do here, plese press NEXT button to proceed to the next step.

Single-run

L-shape

U-shape

U-shape & island

L-shape & island

J-shape

J-shape & island

Gallery

Other

Click on the grey lines along the edge to indicate exposed edges that requires polishing.
unpolished edge
polished edge

Enter the dimensions of your worktops in the feilds below, then enter the total length of the polished edges. Click the ADD button to add fields for more worktops.

Select the desired edge finish for your worktops.

Pencil - 30mm

Pencil Round - 30mm

Double Pencil - 30mm

Double Pencil Round - 30mm

1/4 Round - 30mm

1/4 Bevel - 30mm

1/2 Bevel - 30mm

Ogee

Full Bull Nose

Ogee Full Bull Nose - 60mm

Pencil - 60mm

1/2 Bull Nose - 30mm

Pencil Round - 60mm

1/2 Bevel - 60mm

1/4 Round - 60mm

Full Bull Nose - 60mm

Specify the detals such as type and number of sink or hob cutouts, number of tap holes, draining groves, rounded corners(radiuses) or curved edges. You should also enter the total length and the hight of the splashbacks and upstands and length and width of the window sills if required.

Rounded Corners

0 1 2 3 4 5 6 7 8 9 10

This is tool tip

Oval Edges

0 1 2 3 4 5 6 7 8 9 10

Sink Under-Mounted

0 1 2 3 4 5

Sink Over-Mounted

0 1 2 3 4 5

Sink Flash-Mounted

0 1 2 3 4 5

Sink UnderUp-Mounted

0 1 2 3 4 5

Draining Groves

0 1 2 3 4 5

Recessed Draining Area

0 1 2 3 4 5

Hobs hob

0 1 2 3 4 5

Hobs Recess

NO YES

Tap & Switch Holes

0 1 2 3 4 5 6 7 8 9 10

Hob Splashback

NO YES

Test tool tip Test tool tip Test tool tip Test tool tip

Upstands

NO YES

Test tool tip Test tool tip Test tool tip Test tool tip

Socket/Switch Cut Outs

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15